Usage Instructions

Please watch the video to learn how to use HairUrchins™ Fiber in 3 simple steps


 

How to Use 

The application process is extremely easy and takes only a few simple steps.

INSTRUCTIONS

Before using HairUrchins™ Fiber, ensure the following:


1. Hair is clean and completely dry 


2. Hands are dry.

STEP 1

Hold HairUrchins™ bottle at a 45 degree angle, 1 inch above the thinning area. Adjust the angle to control the amount of product. Shake or tap bottle to apply HairUrchins™ fibers. 

TIPS

  • Start with a small amount and don't overapply. Remember, a little goes a long way.
  • HairUrchins™ Fiber only works on areas with some hair left, so avoid using it on completely bald areas.

STEP 2

After applying HairUrchins™ fibers, gently pat the area with your palm to help the fibers adhere closely to each hair strand. You can check with a mirror to ensure that all sparse areas are completely covered.

TIPS

  • You also may use a wide-tooth comb to style the applied area, but avoid using a fine-tooth comb.

STEP 3

After applying HairUrchins™ fibers, protect your new hairstyle by using hairspray. Hold the bottle approximately 1 foot (30 cm) away from your head while spraying.

Tips: Hairline Refinement with The HairUrchins™ Applicator:


  1. Remove the cap and the sifter, and attach the applicator securely to the bottle.
  2. Use a cotton pad or facial tissue to create a barrier along your hairline.
  3. Depress the pump to dispense the desired amount of Hair Fibers, keeping the bottle about 5cm away from the hairline.
  4. Gently remove the cotton pad or tissue, being careful to prevent the fiber from spreading onto your forehead.
  5. If any fiber fall onto your forehead, gently remove them with a damp tissue.
  6. Spray a small amount of hairspray onto the area to set the fiber in place.

The latest generation Hair Fiber Applicator - Applicator Pro! 

Beyond Ordinary, Beyond Compare

It's not just another applicator; it's the best on the market! 


General Applicator

  • Unnatural Look:

    Many applicators tend to dispense hair fibers one by one in small, distinct dots, creating an unnatural look.

  • Ineffective Layering

    Some applicators can blow away previously applied hair fibers when you attempt to add more, making it challenging to achieve the desired coverage and volume.


  • Nozzle Swapping

    Depending on the position of thinning or receding hair, users often need to switch nozzles on these applicators, making the process cumbersome and time-consuming.

  • Nozzle Detachment

    The nozzles on certain applicators are prone to coming loose during use, causing interruptions and inconvenience.

HairUrchins Applicator PRO

  • Seamless Application:

    Our Applicator Pro uses a scattering spray, providing a seamless and realistic appearance without creating unnatural dots.

  • Effortless Layering: 

    Our Applicator Pro allows for effortless layering, ensuring you can add more fibers without disturbing the ones already in place, achieving the perfect coverage and volume.

  • Nozzle-Free:

    Our universal UniFlow™️ Dispersion System eliminates the need for nozzle changes.

  • Sturdy and Secure: 

    Our applicator is designed for reliability, ensuring that the nozzle and spray cap stay securely in place.

Explore our popular products with FREE SHIPPING and doorstep delivery in days! 

666.00 ฿

HairUrchins™ Q&A

Here are answers to frequently asked questions


Can I apply the HairUrchins™ fibers easily by myself?

You can easily apply HairUrchins™ fibers by yourself. With a hand mirror, check to make sure the thinning area is completely covered. Over time, you’ll learn how much to use on your hair. Soon, you’ll be able to do it without using a mirror. So why wait? Improve your hair and feel more confident. Give Hair Urchins Fiber a try today!

How long does it take to apply HairUrchins™ fibers?

The HairUrchins™ fibers can be applied in seconds. Simply sprinkle the fiber on the areas of the thinning hair where hair loss is most noticeable. However, HairUrchinsTM Fiber only works on areas with some hair left, so avoid using it on completely bald areas.

Can I use hair gels?

You can use hair gel, but wait for it to dry before applying the HairUrchins™ fiber. Additionally, we do not recommend using hair gel as it may make the hairs stick together and decrease the amount of hair visible, which can make it harder for the HairUrchins™ fiber to adhere properly to individual hair strands.

Can I use mousse?

To achieve optimal results with HairUrchins™ fiber, it's best to avoid using mousse altogether. Mousse can cause the hairs to stick together, reducing the surface area available for the fibers to adhere properly. However, if you choose to use mousse, make sure it is completely dry before applying the HairUrchins™ fiber. Apply the mousse first, style your hair, and let it dry completely. Then, apply the HairUrchins™ fiber as directed.

How do I use HairUrchins™ fiber and other medications in the meantime?

If you are using Minoxidil or any topical treatment, apply it and wait for your scalp to dry completely before using the HairUrchins™ fiber. It is always recommended to consult your doctor if you have any specific questions.

Can I comb my hair after applying HairUrchins™ fiber?

For best results, style your hair before applying the HairUrchins™ fiber, but you can still comb it afterwards with a wide-toothed comb. You can also use your hand and fingers to pat your hairstyle into place.

Does HairUrchins™ fibers work for any hair type or any hairstyle?

It's the perfect product for all hair types. Whether you have straight, curly, or wavy hair, HairUrchins™ fibers will work for you. Just sprinkle the HairUrchins™ fibers onto your hair and simply comb it through your hair and style as usual and you're good to go!

Should I apply Hair HairUrchins™ fiber to wet or dry hair?

HairUrchins™ fiber uses static electricity to adhere to existing hair. For best results, make sure your hair is completely dry before applying the HairUrchins™ fiber, as they will become lumpy if applied to wet hair.

Common Problems by Beginners

HairUrchins™ fiber  does not come out easily.

Hold the bottle upright with the cap facing up and tap the bottom of the bottle against a hard surface, like a countertop, 5-10 times to let some fiber in the chamber fall down into the container. To prevent this problem from happening again, hold the bottle at a 45-degree angle as shown in the instructions when applying the fiber.

Fibers falling out of the bottle and onto the floor when opening the lid. 

It’s important to store the bottle vertically. Customers who store the bottle horizontally or upside down in their handbag may experience this issue, as the HairUrchins™ fiber can accumulate inside the inner bottle lid and spill out when the lid is removed. For those who need to take their HairUrchins™ fiber on-the-go, we recommend using the Pocket Edition, which has an anti-fall off lip that prevents any spillage even if the bottle is turned 360 degrees.

HairUrchins™ fiber doesn't match your hair color

Stand in front of a mirror and check the color of the roots in the thinning area. This is the color you should aim to match. If you have highlighted hair, choose the darker root color to match. 

For example, if your natural hair color is dark brown with some gray or highlighted hair mixed in, go for our Dark Brown shade. If you still can't find a perfect match among our colors, you can try blending two shades together that are the closest to your hair color.

Common Mistakes by Beginners

Applying the HairUrchins™ fiber  to a bald or nearly bald area.

HairUrchins™ only works on areas with some hair left, so avoid using it on completely bald areas.

HairUrchins™ fiber falls off or the hair looks dirty after application. 

To avoid this issue, use a gentle patting motion to blend and disperse the HairUrchins™ fibers in the applied area. If the problem continues, it may indicate that you have applied an excessive amount of the HairUrchins™ fibers.


Beginners may be in haste result in an unnatural look. 

To achieve a natural-looking result, apply slowly and avoid over-applying the HairUrchins™ fiber. The rule of thumb is: the less hair you have, the less product you need.